Questions & Answers for: cold cathode lamp

Question about GPSMAP 178C GPS Receiver

1 Answer

...Cold Cathode Fluorescent Lamp) and inverter in it's LCD display? I have no display on startup.... Recently repaired the same problem on my laptop (Toshiba) by replacing the CCFL. Thank you almost all ...

Ad

Question about GPSMAP 178C GPS Receiver

1 Answer

...the cold-cathode flourescent lamps may have failed. This hapens at times. Replacement of the part is only solution. The lamps themselves seldom fail unless they have been broken by crushing the

Ad

...cold-cathode-fluorescent-lamps" that are hung on the rear of the lcd panel!!!! Have I been on the wrong planet? Gee-wiz, what do you think makes the WHITE fixya web page background WHITE???? ...

Question about VG150 15" LCD Monitor

1 Answer

...cold-cathode-fluorescent-lamp" Viewsonic vg150 failure of "failure of "cold-cathode-fluorescent-lamp" power supply called INVERTER CIRCUIT inside of monitor." power supply called INVERTER CIRCUIT ...

Question about TDA-03211C 32 in. LCD HDTV

2 Answers

...cold cathode lamp..with a power supply of 12- 24 vdc.the ballast of the cold cathode is deffective need a replacement... on poloroid it is the main caps 10mic at 450 but be careful changing they ...

Question about LE40R73BD 40 in. HD-Ready LCD Television

1 Answer

...cold cathode lamp.The inverter board is the supplying high voltage supply to the cold cathode lamp.This cold cathode lamp is the illuminating the screen in which the the picture will appear once cold ...

Question about w1907 LCD Monitor

1 Answer

Cold Cathode Fluorestcent Lamp, operates the same way as your Home Fluorestcent lamps. It is used as the light source for your monitor. http://s807.photobucket.com/home/budm/allalbums http://www.fixya

Question about Flatron 575MM 15.1" LCD Monitor

1 Answer

...cold cathode lamp) this needs to be replace you can reach the cathode lamp by disassembling back of your screen/monitor. The lamp is place at the top and bottom of the screen be very careful when ...

Question about Flatron 575MM 15.1" LCD Monitor

3 Answers

...Cold Cathode Fluorescent lamp and it is powered by the inverter, this light needs a high voltage, the input supply for the inverter board is 24 volts dc. Good day and best regards. Kind of yes. ...

Question about Flatron 575MM 15.1" LCD Monitor

1 Answer

Where is the cold cathodes located in my screen? The backlight lamps are located under the light filtering material which is just under the LCD panel. You will have to take the LCD panel assembly ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...