Questions & Answers for: Zanussi cold

Ad

Question about WJS1397W Front Load Washer / Dryer

1 Answer

cold water wash what are the settings for cold water washing please? lost the manual on machines that do not have a variable setting for heat there often isn't a cold wash option, other than pressing ...

Ad

Question about ZWD1270 Front Load Washer / Dryer

1 Answer

ZANUSSI ZWD162701 washing always comes out cold - WHY? And I mean freezing cold Is this normal? With all my previous machines the wash came out warm Does it only rinse in cold water? or is there ...

Ad

new machine cold fill only . old machine hot and cold fill new machine cold fill only if i turn off hot fill valve when removeing old machine which had hot and cold fill and leave turned off when ...

Question about WJS1397W Front Load Washer / Dryer

1 Answer

We have a Zanussi washer/dryer WJS1397W but only a cold feed where we want to put it. We were wondering if this machine could cope with a cold feed only? It shold not be a problem if the machine gives

Question about WJS1265W Front Load Washer/Dryer

1 Answer

can wjs1265w be connected to hot and cold water supply using Y connector - or must it be cold fill ONLY? If there is only 1 inlet connector at rear of washer, then you must connect to the cold supply.

Question about WJS1265W Front Load Washer/Dryer

1 Answer

zanussi 1250 aqua cycle washing machine can it run on cold water only If it has 2 inlets at the rear, then you need to connect the cold supply to the hot and cold inlets by means of a Y piece, ...

Question about WJS1265W Front Load Washer/Dryer

1 Answer

is symptomatic of a malfunctioning water control valve- the hot water one, if the washer is hot and cold fill, and the cold one if it is just cold fill! Sorry but it needs replacing and a service call

Question about WJS1265W Front Load Washer/Dryer

1 Answer

...washer. Apart from that it should be very straight forward- hot to hot inlet, often painted red, cold to the other (unless you are cold fill only but the washer expects hot and cold in which case- ...

Question about WJS1265W Front Load Washer/Dryer

1 Answer

do you put it on cold water pipe Yes the cold water pipe as the new models only have one supply. You connect the pipe to a cold water supply it then goes into the dishwasher and the machine heats the ...

...ON THE RINSE CYCLE. I CAN TURN IT TO SPIN & EMPTY AND THAT WORKS AS WELL. clair you may have a cold water problem, it may have filled with hot water and gone through wash cycle but as it got to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machine Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

jimorris77

Level 3 Expert

411 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...