Questions & Answers for: coil husqvarna chainsaw set

what is the coil gap setting for a 1998 Husqvarna 141 The coil gap shpuld be 0.3mm

Husqvarna Chainsaw #41 What is the air gap for the coil? The air gap should be set to 0.3mm, the spark plug gap should be set to 0.5mm

husqvarna 45 coil setting Slide a 0.25 feeler guage between the flywheel and the ignition module.

husq. 45 coil setting The air gap between the coil and the flywheel magnets should be set at 0.3mm

45 coil setting The air gap between the unit and the flywheel should be 0.3mm for the Husqvarna 45

Set magneto or coil Set points use cardboard from cereal box to gap distance between coil and flywheel and simply pull it out once coil is locked on tight

coil make sure to properly set the air gap (distance from the fly wheel) and clean the area the coil mounts. Failure to get a good ground at the mounting location will prevent the coil from performing

...coil on a weed eater husqvarna 225 ld Remove the four bolts holding the starter recoil assembly. Remove the cover. You will find the ignition coil held on with two bolts, remove the bolts and ...

...coil on ***** 50 chainsaw with multimeter need reading on voltmeter Set meter to ohms and take coil plug off spark plug need to check resistance in coil not voltage find out what the tolerances ...

what is the gap setting on the coil The gap setting is .010 or if you don't have a feeler gauge you can use a business card. GOO LUCK FRIEND.