Questions & Answers for: codes bad knock sensor nissan

...all times (causing the ECU to think that the knock sensor is bad because it's reporting ping at all times) - but also had codes for one or more O2 sensors. Nissan Scope Technician- 10 years with ...

...knock sensor 2004 nissan frontier 6cyl 3.3, not turbo charged. Knock sensors can be difficult to locate because there usually buried under intake or exhaust manifolds and misc. engine wiring and ...

BAD. Got 4-new tires and an alignment - problem SOLVED! I think the combination of a spare tire and an out-of-aligned problem through the knock sensor off. RUNS BEAUTY! I was also told, you NEVER need

knock sensor code & distributor would the distributor have anything to do with the knock sensor code on a 2000 Nissan frontier?? no but the knock sensor does send a signal the ecm and it will ****

...knock sensor picks up vibrations from detonation and sends a signal to the engine computer, which then adjusts the igntion timing [ retards advance ] to correct it. You can read the operation of the ...

codes PO340 - Cam shaft Sensor and PO328 knock sensor, would both need to be replaced ? is there one that should be replaced first? would that make the truck suddenly stop cranking with no other signs

...knock sensor first as it's cheaper than the ECM. The two things these codes have in common is the ECM (Engine Control Module) but that's more expensive. The knock sensor isn't the easiest job but ...

...bad idea, as the knock sensor helps prevent knock, which will over time hurt the engine. Knock sensors listen to the sound the cylindersw make during combustion. They are necessary for the engine ...

...the knock sensor on the block, check the connection. If a bad connection scrape spade to bright metal both sides reconnect, clear code. Recheck codes. No help must be knock sensor. so must be

which wire is positive left or right on the knock sensor harness for 2004 Nissan Frontier I believe its the right, but if I am not mistaking, it does not actually matter.