Questions & Answers for: code f21 kenmore washer

F21 error code on a Kenmore HE2 front load washer I took off the lower front panel and cleaned out the two pipes and the filter. I restarted the washer and still get an F21 error code. The load in ...

Ad

Question about 46462 Front Load Washer

1 Answer

..."F21" error is a "Long Drain" error code. The following link explains: http://www.fixya.com/support/r1484065-f21_error_code_whirlpool_duet_kenmore If you still require assistance, please let me

Ad

Question about 46462 Front Load Washer

1 Answer

code F21 F21 is a long drain...it is taking too long to drain..you have a something slowing down the drain.. you can remove the bottom panel and clean out coin trap... if there is nothing then you may

Question about HE3T Washer

1 Answer

The washer isn't spinning all the water out. A code of F21 appears. This usually indicates a clogged drain filter or pump. Try this link it should help F21 Fault Code Repair

Question about Elite HE5t Washer

1 Answer

what does the code F21 mean on my washer f21 is long drain error exceeding 8 mins check drain hose for clog or filter on washer at drain pump also remove hose from tub to pump check for blockage

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

f21 error code kenmore washing machine F21 error code F21 error code kenmore washing machine YouTube

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

f21 code on kenmore elite washer F21 error code kenmore washing machine YouTube

Question about 3.8 cu. ft. HE3 Front Load Washer

0 Answer

...Code F21 & Sud ... ? 5:02 https://www.youtube.com/watch?v=vAg6vqidW3E Nov 9, 2014 - Uploaded by DDIY Guy Danny Jose Kenmore HE5t Washer Repair for Error Code F21 & Sud ... The only other ...

...f21 error code. I unscrewed the white drain filter and cleared it. There was little in it. I keep getting the f21 error though. Can you help? Search Results whirpool f21 error code - YouTube ? 3:04 ...

Question about 3.8 cu. ft. HE3 Front Load Washer

1 Answer

...side of the machine then the AC circuit pops. What could be the problem? The F21 code is gone but now it shows F26 Better check your work, you hooked up something wrong. a short or wired ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...