ibm wheelwriter 30 series 2 what does 215 on the screen meen. 215 indicates a printwheel error. Remove the printwheel, look for debris in the P/W cartridge and the area where it sits blow out the P/W ...
215 error code on our Wheelwriter 30 Series II. Anybody out there seen the same? Any fix? I just hung up with a local repair shop. They located the error message and said it's a function board error &
IBM WheelWriter 30 Series II HELP!! My display has a square with a line through it and the number 121. I cant type or do anything else. What is the does this error code mean? The 121 indicates a ...
...get a message 215 with a little square box in front of it with a diagonal line through it. Could you please solve this for us? I believe a 215 code is a bad printwheel sensor. You need a tech. ...
...IBM Wheelwriter Series II so I can use it's features to the fullest, but at the moment "ARTN" is showing up on my screen, what is that exactly? How do I get it off? Thanks! This is automatic return, ...
Question about Wheelwriter 30 Typewriter
...IBM Wheelwriter 30 Series II has a message of a box and an X in it and then the numbers 215 can someone tell me how can fix this? Check to be sure the printwheel to be sure it is properly installed, ...
...Code 215. I read thru the listings and followed the advise given in regards to the printwheel, I removed it....blew off the dust ( wasn't much in there, but blew it off anyway) reseated it and that ...
Question about Wheelwriter 30 Series II Typewriter
IBM Wheelwriter 30 Series II Since changing IBM Wheelwriter 30 Series II Since changing correction tape cannot get it to underline properly The ribbon may not be fully seated on the ribbon deck. The ...
...Wheelwriter 30 Series II. When I turned on the machine this morning it made a couple of ringing sounds and then on the display it reads a square with the number 215. Nothing else works on the ...
code of 215 with a box with a slash through it and am unable to type on it 215 is a Print Wheel error. Remove the print wheel, look for debris in the P/W area, if you have a compressed air source blow
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions