Questions & Answers for: cobra 29 ltd testing

Question about 25 LTD 40-Channels Base CB Radio

1 Answer

...Cobra 29 LTD NW CLASSIC. everything seems to work fine so far but the PA speaker. On my old radio the speaker was quite loud. this one is so super quiet. The radio is used but was said to be tested. ...

Ad

Cobra 29 LTD Classic not transmitting or receiving I just bought and installed a Cobra 29 LTD Classic with a Firestik 2 (4') antenna on a 99 Dodge 2500. I mounted the antenna on my alunimum toolbox on

Ad

cobra 29 is one channel off, ch 7 is on ch 6 and so on cobra 29 The radio needs to be tuned. This should only be done by a licensed repair shop. You will spend less money taking it to a shop than you ...

Cobra 29 ltd when powered up error Y can anyone help me when the power is on a error code i think is on the scren the letter Y Hi and welcome to FixYa, Often an error code "Y" would indicate ...

Cobra CB gets power, no signal, no noise, no P/A i have a cobra CB lowest model, 19 i think. i wired to batt. and connected to antenna. nothin. no static, no test, no noise. Speaker fried? should i ...

Question about 29 LTD CB Radio

1 Answer

Cobra 29 LTD Bluetooth i have a cobra 29 ltd buletooth model. ive tested the swr and they're all fine. but the darn antenna warning light keeps comming on and off as the volume and pitch of my voice ...

Cobra 29 LTD in my wifes truck. Used a mount and screwed it to the bed of the truck. Has 18' Coax, new mic., 3 ft firestick. Gets power just fine. As a test for distance... she drove approx 1/2 a mile

...cobra 29 ltd classic? I have dead key, Rx works, TR17 tests good, New Tx final fixed no dead key, still have no modulation, mic tests good, used buzit on pin 4 of audio chip and get noise through ...

Cobra 29 LTD Classic I believe to wire a Sadelta M3 microphone to a Cobra 29 LTD Classic CB radio: The Sadelta M3 microphone has four wires: white, shield (bare wire), red, and black. The Cobra 29 LTD

...Cobra 29 LTD Classic Wiring a Delta M3 microphone to a Cobra 29 LTD Classic CB radio requires connecting the wires from the microphone to the corresponding pins on the radio's microphone jack. Here ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...