...gonna cost? the transmission is fine its the springs in the preasure plate that have shrunk and the clutch needs to be replaced. I hope this advice helps. can u rate the advice ...
...and the emergency brake is on. If this is a stick shift car, there is a safety switch on the clutch pedal that keeps the car from starting if the clutch is not pushed in when you turn the key. ...
i have a 2003 ford mustang gt stick shift. clutch sliping i have a 2003 ford mustang gt stick shift. when i am driving my clutch will slip like my clutch is still ingaged just a lil bit and when i ...
Question about 1986 Mustang
...and wont move out of the first gear possition then the chances are that it could be either the clutch has gone or the thrust bearing on the clutch has failed these parts both come in a clutch
...clutch dust over time collects and sticks to bendix gear so when starter operates and engages flywheel and starts engine you release key but due to this dist the bendix sometimes does not throw clear ...
...tie rods for valance purposes, had all spark plugs & and wires replaced, fuel filter replaced, clutch replaced, flywheel rectified,etc. the problem i am having is that when the car is in idle,
Question about 1989 Mustang
...an automatic, it could be something in the torque converter or transmission. The torque converter clutch could be
...I was in third and able to 30 but every time I slowed down or shifted the noise started again. My clutch also started to stick a little. Does this man my clutch is going out? My transmission? Do I ...
Question about 2000 Mustang
...Also look at the ignition switch and fuses, neutral/park switch if it's an automatic, and the clutch switch if it's a
Question about 2001 Mustang V6
Mustang will not start, unless you pop the clutch, put in a brand new starter and it still will not start on its own, battery is good, all lights in car work and so does the power windows. There are ...
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions