Questions & Answers for: clunking starting manual car

manual change . also a clunk/jump when selecting drive or reverse After a jump start because of no electrical power, the car will run rough for several days (expected) while it adjusts to your driving

95 Lumina Trans doesn't shift properly I have to shift the car manually. If you don't pull it down to first, rather than just getting drive and going, it doesn't start to move. When I pull it to first

...manual gearbox put the car bin 4th gear, release the handbrake and rock the car back and forth.if you hear a clunk then the solenoid has released. try starting the car again. if its an automatic ...

car starts clunking when in drive after driven for about 10 minutes. mechanic said it could be a sensor. does the car have an automatic, or manual trasmission!

Just started to pull away from a stop in 1st and Just started to pull away from a stop in 1st gear and heard a loud clunk. Manual transmission no longer connected to engine. No fluids or other outward

...clunking, especially up hills when shifting from 4th to 3rd. It feels like running over a rodent when it clunks, so its not just a little slip of a band or adjustment. We took it in. they said it is ...

...clunking noice when i start moving from a complete stop, it doesnt make the noice all the time but most times and only in 1st when starting sounds like your c/v axle bearings going bad replace with a ...

My 1994 ford ranger 4.0 manual starter disengages before my truck starts in only turns a quarter turn before disengages Starter relay replacement - Ranger-Forums - The Ultimate Ford ... ...

2008 Suzuki Grand Vitara died while driving and will not start Driving down the interstate when the car died. Tried to start it, but it would not fire, assumed a fuel problem. Had the car towed home. ...

...car is manual gearbox put car into 1st or 2nd gear and with the ignition off rock the car forwards and backwards if you hear a clunk noise the starter motor has released itself and should start. 3 if ...