Questions & Answers for: clogged pump

Ad

Question about Washing Machines

1 Answer

...clogged, then the pump will need to be checked. Remove the hoses from the pump and use a flashlight to look into the suction port of the pump. Look for anything clogging the pump (like the occasional ...

Ad

Question about 24032\24036 Top Load Washer

2 Answers

... Hopefully it's just a clogged pump. Sorry for your trouble and I hope this helped. Best wishes. if hose wasnt clogged I would check the pump and see if it has a clog or could be just a bad pump ...

Ad

Question about 1.5 Hp Northstar High Performance Pump

1 Answer

...clogged impeller. With the power off reach back into the pump through the pump pot with a long screwdriver and feel around. If it feels spongey it there you have a clog. Take the serew driver an use ...

Question about 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

1 Answer

...pump is clogged and you?ll need to clean the drain filter and drain pump. Please note that dishwashers don?t pump out the complete water such that heating element doesn?t overheat. Please post back ...

Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer

1 Answer

could have an undetected clog in the drain hose or you could have failed/clogged drain pump. If the pump is not running in the drain mode then you could have a failed control board or a wiring failure

Question about WM3677HW 3.7 cu.ft. Front Load Washer and Dryer

1 Answer

...see a puddle of water appear under the washer due to a clogged pump. This can also happen if the pump itself is worn out and no longer working up to specifications.Best of luck with your repair. ...

...clogged or damage pump impeller. (pump may have tank screen, it too must not be dirty) 2: clogged line. 3: clogged in line check valve. (tiny) usually found close to pump. within 1 foot or so. most ...

clogged no? pump dead, or clogged clean pump or replace, your call. if pump seems dead i check for 12vdc at pump on demand. kid turns switch and 12vdc lands on motor pins. got 12v, good. so pump spins

...pump intake is not clogged. If no clogs are found, and the pump does not work with the hose disconnected, it is probably the pump. Depending on the age of the pump and the pump size, it may need ...

Question about 2007 Highlander

1 Answer

...clogged pump. Did you try to do this with the oil cold? If so, the pump has to work MUCH harder and may not pump. Clean out the oil from the entire system, looking for clogs. Manually filter the oil ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Brad Brown

Level 3 Expert

18067 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...