...light is still on Hi, Make sure the brake discs are still within spec, as they usually only last the life of one set of OE pads. Make sure your brake pads has the recess to accept the clip in wear ...
...so that i can replace it When you open your hood there is a hole in the fender you need to stick a small and long skrewdriver in it and push the clip down and pull the light out with your other ...
...to put long screwdriver in to activate clip. 1997 BMW 323I 1. Lever out retaining clip from top and pull turn-indicator light forwards. 2. Unlock and take off bulb holder. 3. Turn and pull out
...light inside and a cable comes out the end with a clip .then going across the pins on the special BMW connector block it will go out with the resistance of the bulb across it ,but ??big but ?does it ...
...light and there ill be a white plastic tab/clip with a barb on the end of it extending back a little. Flex the tab away slightly with a long screwdriver or similar and at the same time pushing the ...
Usually answered in minutes!
574 Questions
13 Questions
