Questions & Answers for: clean zebra print head

...Zebra 2844 that I use to print shipping labels. It prints the barcode perfectly, but the text is all fuzzy, not crisp like it should be. Any suggestions? Lizardlick, I found this information in the ...

...Zebra Thermal Printer has dropped its density of print to about 50% The strange thing is a test label prints with no loss of density.I have wiped the print head with ethanol and increased the print ...

Zebra LP2844 thermal printer the print on my labels has begun to fade how can i improve this open the unit and on the front top you will see a thermal print head, (looks like a shiney bar) using an ...

...free cloth (or Q-tip) to clean the print head on the Zebra 2844? I'm looking for some alternative to paying $35 dollars for a 12 pack of cleaning pens... no i would not advise that as being a good ...

...zebra. It looks like the print head is simply dirty, but no matter how I clean them I still have the problem. How many labels has the printer printed? Because it sounds to me like you just need to ...

...clean the thermal print head between each ribbon change. Use the Zebra cleaning tool (looks like a magic marker) or a q-tip with a little bit of denatured alcohol. If this is not the issue make sure ...

...with zebra printer 110xilll Plus. white streak down middle label. V You can try cleaning the print head with Isopropyl Alcohol, if this doesn't fix it - you printer will require a new Print ...

zebra s600 doesnt print correctly. left side of label has lines going through it If the lines are blank, you can try to clean the print head with Mentholated spirits or Isopropyl Alcohol. If this ...

...Clean the Print heads" and click on it. You may be asked to choose which print heads; choose them all if you are. Make sure there is paper and ink in your printer, and that it is turned on ahead of ...

...zebra printer, I use Bardy software. on almost ever label there is white line that appear to be wrinkles. Never in same area. check to see if part of a label is stuck to the print head. If not then ...