Questions & Answers for: clean oster blender blade

HI I got a proctor silex 7 speed blender 2nd hand and after cleaning it I don't know how to re-assemble it....does the gasket go on first...or the blades first then the gasket??? Gasket, then blades, ...

blender against the blade and the glass, I shake the container to loosen the materials and reseat it onto the drive pin as mentioned above. I experienced the blades freezing after making smoothies and

...to keep the blade assembly clean and working longer is to put water and a drop of dishwashing soap in the blender after use and run the blender at low speed for 15-20 seconds - an old Osterizer

...blender base has become discoloured with a sort of green mouldy streaks, how do i clean If you remove the blinder base where the blades are you can put it all in the dishwasher. To do this grab the ...

how do i remove the blades to clean them ? The base should unscrew from the jar. Take careful note of the order that the pieces come out, and replace them in the reverse order. Best regards, --W/D--

blender motor out. Smart move. The blade assembly is almost frozen and the motor does not have enough torque.. You need to remove the blade assembly and completely clean out the bearing and reassemble

...Oster blender is probably around 25 years old but still works. I stuck the blade on the base without the jar on because I was cleaning the jar. (You aren't supposed to do this for safety reasons, by ...

oster clippers my clipper with #10 blades is still clipping cleanly, but the blades "rattle" badly. it could be metal fatigue from the blade. Try a different blade and see if it does the ...

...if the grey seal is between the metal blade assembly and the glass jar. I had this issue and it turned out to be that a friend had reassembled the blender jar parts after taking it apart to clean