Questions & Answers for: clean flathead

clean once before and noticed some potentiometers on the bottom. (There are holes on the bottom of the plastic casing for easy access using a small flathead screwdriver) Those might be to adjust speed

...come on how do i energize it ? take apart with flathead screwdriver, clean contacts, lube the slide mechanism and should be good from there once its open, youll see the problem had mine apart ...

clean the subwoofer for my Harmon Kardon SounStick II system, but cannot find a way to take the subwoofer apart. I have not been able to find a solution online, any suggestions? Thank you. Check for a

...hard water, and I've been using my gaggia carezza machine for about a year now without thoroughly cleaning the brewgroup/shower plate, etc. (I know, bad!!). I do run hot water through it after

...CLEAN IT I looked all over for the disassembly instructions for the JM300 to no avail...so I got a flathead screwdriver and decided I'd either get the darned blade out or break it for good. It took ...

...verify warranty by calling carrier) take a small jewelry flathead screwdriver and remove the chrome piece from around the ball and clean the entire assembly with rubbing alcohol Hope This Helps ...

...clippers are too old and the motor is bad or you may have to take them apart and give them a good cleaning. Always use 3-1

flathead.carefully pull apart.inside has silicon pad under keys.VERY FRAGILE.use care when washing.i took the keyboard and soaked it and scrubbed it with sponge and brush with HOT  water.mine was

1995 International flathead 6 diesel wont run Check igniters for spark clean try starter fluid in injector hose.

...flathead screwdriver. Clean the mounting surface. If there was adhesive holding the old booster, use a cloth and some rubbing alcohol to clean the surface where the new booster will be attached. ...