Questions & Answers for: clean filter fisher paykel top

Ad

Question about GWL11 Top Load Washer

1 Answer

Fisher ad Paykel top loader plugged filter I had a repair man here before and he cleaned the filter, but I cant remember how he showed me to do it, it was really simple, I don't even remember where it

Ad

Question about IWL12 Top Load Washer

1 Answer

...filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it (4 to 6 inches maximum). Snaking out ...

Ad

Question about Fisher & Paykel Washer

2 Answers

...clean out your filter............. tip the machine back and follow the hose from the pump to the diverter valve, it will have 3 hoses and 2 wires going to it. remove the diverter valve and remove any ...

...clean the filter in my washing machine as it leaves many lints on the cloth. But I am unable to find the filter for it. Can you help me? Fisher & Paykel washers do not have lint filters inside the ...

Question about GWL11 Top Load Washer

1 Answer

clean out the filter for my GW711 excellence top loader washing machine? everything keeps coming out completely covered in lindt and undissolved washing powder. I cant seem to find out how to clean it

Fisher and paykel smart drive top loader , Wont fill properly . Hi , When i press start the water starts to fill then stops for a second then starts again then stops and starts ( on and off at about 2

Question about GWL11 Top Load Washer

1 Answer

...clean it!!!) hello mam the filter will be located at the side wall of the machine this will be having holes on its body and this will be having a cloth like bag or a mesh.please check it inside the ...

Question about GWL11 Top Load Washer

1 Answer

...filter or a kinked drain hose. To resolve the issue you'll need to clean the drain hose, inspect if the drain hose is plugged. If the hose is fine, then remove the front kick panel and access the ...

Question about IWL12 Top Load Washer

1 Answer

...clean the drain motor/pump lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to rinse or spin or release the door lock if there is any water ...

Question about IWL12 Top Load Washer

1 Answer

filter which should just slide out. Clean if necessary and replace each one and the hoses. If after turning the taps back on there is no improvement, the problem is symptomatic of a malfunctioning hot

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...