Clean or replace that. Had the same problem 2 years ago. Washing filters only a short-term solution. After contacting Dyson, they replaced the shroud and cyclone under warranty. This cured the problem
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...clean that part and the little clear hose. We checked the regular long hose and after all this, the power came back. Unfortunately, we do not have an extra filter so we borrowed a vacuum. But, now we ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
2 Labs & There was a Lot of Dirt); Left It Disassembled & Open for a Week Before Using Again. When I Did Use it Again, It Made My Whole House Smell Like Mildew!!! I Don't Know What to Do &
Question about Lift-Off(R) Revolution(R) Turbo Upright Vacuum
you cant take them apart to clean them. You don't want a dyson either, they aren't any better for pets. With all that hardwood floors you should get a good canister vacuum, sebo and miele are the best
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...clean my DC17 every 2 weeks. When I put it back together it always works perfect. This last time, I noticed that the self propel is not working...am I missing something? I took it apart to be sure ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...Dyson Animal DC 28. It vacuums fine on floor mode, but, when locked in the upright position it releases pressure though the little valve behind filter a. I have only had it for 2 weeks so I'm hoping ...
...Dyson DC23 turbine head is not spinning as well as it should. We have dismantled the brush bars and they are now clean on the inside and out. And there is plenty of suction. The head does work ...
2 dyson and on both of them the heel has stopped turning. I have checked to make sure the belt did not break, and have cleaned all debris from the brush wheel, still no movement. Please let me know if
Question about DC40 Multi-floor Vacuum DC40
clean in all the places that are accessible so I don't th Cleaned it and recharged it. Make sure the charger is working first. You can test it with a voltmeter. If it's ok then the power switch is the
Question about DC40 Multi-floor Vacuum DC40
...for the base. I seem to remember there are actually 2 under there. Also make sure you wash inside the cones at the top as you get fine dust in there. Filter kits are here dyson filters Google ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions