...clean the drum as instructed in the maual, change the toner and put on a new drum. What can go wrong. I get the message Dust on Drum tried cleaning corona by moving blue thingami and error still ...
...clean it or access it otherwise. All help greatly appreciated. Hi Allan: Sounds like you need to replace the drum pivot plate assembly. This assembly is what cleans the drum assembly prior to putting ...
Question about Phaser 8560DN Laser Printer
...can see the streaks is deffinately from the drum you can strip the drum,clean the corrona wire and grit,and clean the drum brush.Strip only the drum unit if you sure the lines is caused by the
...clean the drum on the HP laserjet p3005n The toner and drum are one unit. You don't want to clean the drum. It is done automatically as the drum rotates. The cleaning blade scrapes the residual toner ...
...drum fixing plate which was removed. 3) Check the cleaning blade and the red felt for damage. ?If there is damage, go to step 5 ?If there is no damage, go to step 12 4) Remove the main charger. ...
...clean the drum in my Muratec copy machine versus purchasing one if I can clean it? Hi when you say clean the drum the drum is cleaned by the drum cleaning blade if the blade is no good then the drum ...
...clean the drum Hi Just open your drum and take the tissue and clean the drum and roll the remove the black cartridge powder to drum clean the put again... this is very simple way to clean the ...
Question about Aficio 1035 Copier
...clean the drum charge roller use the izopropilalcool,clean the charge roller cleaning roller,clean use the vacuum cleaner the waste toner (located under transfer assembly 6 screw),activate the ATDC ...
drum cleaning blade,clean the charge corona wire and grid,install the new drum and drum cleaning blade,clean the image transfer /separator corona wire,clean the optical parts(mirrors ,lens,glass)clean
Model ar5516. Why is drum not cleaning? Replaced drum cleaning blade and charger unit Sir, Did you prime the cleaning blade with toner when you installed it?, and did you ensure the new cleaning blade
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
