Questions & Answers for: Leviton how to clean cast iron burners

cast iron boiler- hot water heat-35 years old Burner is Beckett Turbo 2000 about 20 years old (used to have delay on oil valve when starting-removed by oil company) It does have a internal flue damper

On an outlet the reset button will not stay in. I've tried plugging in my curling iron and also an electric shaver and the button will not reset. Try to reset it by pushing the "trip" button. If it ...

2 yr old softub Hot tub with connected GFI wire was emptied and cleaned out and filled; now the GFI trips when pluged in, and will not turn on! Either the GFI is bad or it is tripping because there is

...Turn off the power, and examine the connections. They should be nice and tight with plenty of clean copper in contact. If this dimmer has stranded wire leads which are connected to solid wires ...

Actually I have 6681, 600w; want to use to regulate 80w soldering iron. Why can I not measure resistance across new switch, before installing? If it is inductive, how can I measure to know it will ...

i have a vintage leviton switch. you plug it in a 200 or a 125 watt receptacle and it has several outlets on the side where you plug in another electrical appliance, iron, radio, etc.. how old is this

...buy circuit analyzer at home center and plug into receptacle on same circuit. If circuit is not clean, this will affect electronic devices and shorten lifespan, causing operation failure. If

...Ham, Police, Taxi, etc.) cause unattended operation (on and off). Make sure the switch surfaces are clean and dry. Try changing metal switch plates to plastic / nylon (and vice-versa) types. Ensure ...