...clean your burners. Removed one by one and get them clean with hot pressure water. Most of the time, this easy and fast job will resolve the problem, and don't forget, get those burners cleaned every ...
flames coming out of the exhaust Clean burners and orifices clean tubes heat tubes and also check the exit to the stack on the deep fat fryer. check pressure. fire off
...(chimney) on the back of the fryer. you need to clean the burners and fire tubes, remove all carbon deposit and make sure that the unit receives sufficient gas pressure as labeled on the
...burns with alot of black soot you need to clean the burners and the fire tubes, remove all carbon deposits.running the unit on low gas pressure results in carbon build up on burners and fire
...clean this out? Soot is formed when the fuel combustion is incomplete. Incomplete combustion may occur if the fuel is low, air and fuel mixture is not correct, wrong size of burner orifice with ...
...clean the tunnels and the holes in the burners and it works for a few days and then clogs up with carbon making it unbearable to breathe yet alone cook. The flame is restricted to flow inside fire ...
...fire tubes, better check and have an authorized service technician clean them. Make sure that the fryer is receiving the rated gas pressure and correct gas type as stated on the nameplate, this way, ...
Question about SG14 Deep Fryer
...this done by a pro. you have to remove the gas valve and control plate to get the burners on the right. use a brush to clean out the the tubes. Then you will get that classic SG14 roar when she
...which results in soot formation.. The type of gas must also be compatible with the orifice sizes on pilot and burners. Check and clean as needed all soot formation on burners and fire tubes.
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions
