Questions & Answers for: clean brushes hoover carpet cleaner

Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

...brushes are not turning, pull the brush block out, turn the machine on and see if the square hole where the brush block was, is turning. If not then the turbine is bad. Sometimes you can take the ...

Ad

Question about F5906-900 Upright Steam Vacuum

2 Answers

THIS MAY OR MAY NOT WORK. ANYBODY KNOW WHERE I CAN FIND A SERVICE MANUAL FOR A HOOVER CARPET CLEANER? SEEMS TO BE A VERY CLOSELEY GUARDED SECRET. RON The brushes on the Hoover steam spin will not move

Ad

Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

hoover steam vac legacy the brushes on the carpet steam cleaner quit working. cleaned the screen and took the brushes out and cleaned. it still don't work.. Hello tmc68cam. I will need the Mgfr., ...

Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

...times and it is correct. whats up? I just needed to clean the brushes I finally just found the clips on each side of the brush roller and pressed in towards center and was able to pull brushes

Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

clean the filter screen from the base, behind the brushes. Squeeze the two red tabs together, and pull down from the base. Clean the hiar/debris from the screen. (3) Assure the Brush Speed knob on the

Question about F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

1 Answer

hoover carpet cleaner brushes do not move Agility hoover carpet cleaner one year old, brushes do not move for cleaning. did you check to see if the belt came off or its stretched?

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

2 Answers

clean. Air has to pass through the screen to turn the turbine. The brush block assembly may be restricted from turning by debris in the brushes or gears. Try to turn the brushes by hand. If they won't

Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

hoover deep cleaner brush won't work If the vacuum cleaner comes on but the brush will not spin, try replacing the belt and clean each end of the brush from lint , string, carpet materials.

Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum

1 Answer

hoover brush and wash instruction manual how does it work Hi there! To prepare for cleaning, put the solution and water in the top tank. While cleaning, all the dirty water gets sucked into the bottom

...Hoover f7412900 carpet cleaner and one day the brushes stopped working. ...It was a couple years ago, so I don't quite remember, but it was in the manual, ... Itwon't start back up. ... If it is only ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...