Questions & Answers for: clamping down kitchen sink

Ad

Question about Plumbing

3 Answers

...kitchen. this could be something as simple as debris n your aerator To see if this is the problem remove the silver collar(nut) at the end of your faucet spout by turning counterclockwis (plug the ...

Ad

Question about 212-1088-00 White Dumount Double Basin Cast Iron Kitchen Sink from th

2 Answers

...kitchen sink installed on a coriander counter top? Turn the water supplies off unscrew the hoses,get a flashlight and look under the sink you should see clamps around the top holding it in, unscrew ...

Ad

Question about Delta 174-SSWF Waterfall Single Handle Kitchen Faucet with Spray and Soap D...

1 Answer

kitchen faucet and I am trying to un-install it so I can put in a new faucet (the white finish from the Delta unit started peeling off several years after we bought it -- seems like a low-quality unit

Question about 24 in. PLD2850 Built-in Dishwasher

1 Answer

kitchen sink and used a drain cleaner. Since liquids find the path of less resistance, could some drain cleaner have gone down that drain and onto a "baffle" if there was one? Most dishwashers have a

Question about 7840 Camerist Single-Handle Kitchen Faucet with Side Spray Chrome...

2 Answers

kitchen sink faucet side sprayer is stuck on side sprayer is stuck on - water only come out of the side sprayer (even when trigger is released) - clamped the side sprayer hose for water to come out of

Question about FF-303 Kitchen Faucet with Pull-Out Spray Chrome/Black

1 Answer

kitchen faucet - the spout has a retractable internal hose for spraying down the sink - it is not retracting as it should Look at the clutter under the sink. Is the hose tangled or caught on something

Question about 23 in. BFI62 Built-in Dishwasher

1 Answer

...clamping pressure. Use adjustable pliers to compress the spring clamp so you can pull the clamp and hose off the valve. Remove the spring clamp from the hose. Buy a worm-drive clamp at your hardware ...

Question about KSLS-3322 Double Bowl Kitchen Sink, Black Galaxy

1 Answer

down with the sink in place then remove the sink. Carefully use a high speep drill bit to drill a series of holes at each location beingcautious to stop at least a 1/4 inch less then the minimum depth

Question about K33463NA Toccata Double Equal SelfRimming Kitchen Sink

1 Answer

Hints on installing the clamp down clips. The directions are vague and we can't get them secure. The link will allow you to zoom in on the clamps for a better look. The longer nut driver you have the ...

Question about K33463NA Toccata Double Equal SelfRimming Kitchen Sink

3 Answers

...kitchen faucet, its a Moen 7594 EC pull down handle that is sagging and dont stay up see picture. HELP !!!! -You mean it's loose and wobble...? If so re tight its lock nut from under neat. Good luck ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

Donni Steen

Level 3 Expert

687 Answers

Brad Brown

Level 3 Expert

18072 Answers

Tom Chichester

Level 3 Expert

53586 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...