Questions & Answers for: chrysler sebring timing belt broke

Question about 2005 Sebring Conv

1 Answer

timing belt my timimg belt broke does it need a new engine? What engine do u have? it depends, the worst case senerio would be new valves in most cases.

Ad

Question about 2006 Sebring

2 Answers

Timing belt I have a 2006 Chysler Sebring 2.7L engine. I have 58K on the car. Do I have to be concerned with the timing belt at 60K. I know some car have maintenance at 60K for the belt. My owner ...

Ad

...chrysler sebring. the timing belt is broken and thats all i know for right now. i have heard since it is an interference engine that a valve could have went right through the block. so my question is ...

...chrysler sebring convertible The 2.4L is an "interface" engine. This means the vavles share the same space as the piston. When the belt breaks piston can hit valves and cause big problems. In this ...

...chrysler sebring. You have a zero clearance engine, meaning there is no room for clearance between the pistons when they're up and the valves are closed. If the belt broke there is a high probability ...

Chrysler Sebring, the timing belt broke, had it replaced, when i got the car back th oil light was on and would go off for a few seconds then come back on, and now it stays on all the time. The oil is

2000 CHRYSLER SEBRING 2.5 ROCKER ARMS BROKE 4 BENT VALVES WHAT WOULD CAUSE THIS broken timing belt timing not correct....in any case engine is finished ....dont rebuild buy donor cheaper and faster

Question about 2004 Sebring

1 Answer

...Sebring that doesn't bend the valves when the timing belt goes. Put a new belt on and you should be ok. Some manuals say the valves can hit each other but I ve worked at a dodge dealer as a tech for ...

...Chrysler Sebring LX 2.5 v6 See if the ignition still works by checking for spark on a spark plug wire. If no spark could be the ignition module or the crank position sensor. I doubt if anything wrong ...

...chrysler sebring had it towed to garage they said needed replacement This is a bit of work. I done plenty of head work. Rarely are the cams worn enough to replace. I would bet they are throwing them ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...