...chrysler intepid 2.7L no fire #2cyl, checked with ob scan..codes po352, po300, po302, p1371 was detected,not sure where to start checking. The 300 and 302 mean the following 300 I believe is random ...
...Chrysler Sebring with a 2.4 engine. The check engine light came on and the car runs rough. Had the code checked and it came back with a 303, 302 and 300 codes. What is the most common cause of these ...
...300 is random misfire.does the car need a tune-up plug,wires, the fuel injection system need cleaning,also there could be a intake vacuum leak with the intake gasket leaking causing the misfire near ...
...it? P0301 Misfire when cold. im having the same issues! i have 2007 chrysler 300 i changed all 6 spark plugs and the coil pack on cylinder 1! my check egine light is still on! dont no what too do
Question about 2006 300
...Chrysler 300 base 2.7 with the following codes P0430 Bank 2 and P0305 Cylinder 5 misfire. I had the catalytic converter replaced in 2012, I had a new coil pack, spark plugs, oxygen sensor and fuel ...
PO 301 PO 300 ERRORES EN CENSOR you have engine misfire on cylinder 1 and random misfire, more than 1 cylinder is not working properly
Question about 2006 300
...chrysler 300 has this kind of stalling problem lately after i fixed the misfiring issue on my #5 cylinder it works really good for one day and after that had this stalling problems any idea what ...
creslar 300 dtc cood Chrysler 300? P300? if so it means random misfire all engine cylinders. Check for engine vacuum leak.
Question about 2006 300
...300 Touring. It doesn't drive over 30 mph. What do codes P0303 and P0203 indicate? Misfire cylinder 3 and injector fault cylinder 2 Hello John: PO303 mean you have a cylinder 3 misfire. Code PO203 ...
How to find the no.6 cylinder on a 2006 Chrysler 300 My 2006 Chrysler 300 is misfiring from the no.6 coil drivers side last cylinder by firewall
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
