Questions & Answers for: chevy starter covered oil

STARTER chevy 1500 1994 v6 I removed the two bolts that hold the starter on, and disconnected the wires from the solenoid. The starter is completely loose, but I can't figure out how to get it out. It

Ad

Question about 2000 FLSTC Heritage Softail Classic

1 Answer

...starter like u would a chevy at the solinoid at the top of the starter if this works jreplace the stater button at the bars and check the starter relay behind the cover at the oil tank also this ...

Ad

...starter on 2000 chevy silverado These instructions are for a 5.3L. Unless it is a V6 or diesel, the instructions will be similar if you have a different gas V8. Disconnect the negative battery cable ...

...starter on my 1988 chevy k1500 (305) Could be the oil pan gasket or the rear main oil seal. Remove the torque convertor cover. ( I am assuming that your truck is an automatic) That's that thin metal ...

2003 chevy cavalier has oil leak above starter have had a new rear seal put in but that was not the problem Check your valve covers gasket valve cover gaskets are above starter

...starter located in the 1991 Chevy Lumina APV ?? REMOVAL AND INSTALLATION 3.1L Engine Besides regular hand tools, a special oil pressure sensor socket will be necessary to complete this operation. ...

Question about 1991 Lumina Apv

1 Answer

...Chevy Lumina, dumping oil when running all over the starter.......where is it coming from? Behind the starter? ?????? there is a oil sending unit on the side of the block(motor) right above the ...

Question about 1991 Lumina Apv

2 Answers

...chevy 3500 454 4x4. starter is wet with oil and appears to be dripping from bellhousing. what other possibilities could there besides rear main seal? You have guessed the problem, it is the main seal ...

...chevy uplander oil pressure switch where to find and install oil pressure switch The oil pressure switch should be by the oil filter. You will need a socket 1 1/8 ,I believe is the correct size. Yes ...

chevy silverado 305 cu.in. REMOVAL PROCEDURE Remove the oil level indicator tube. Raise the vehicle. Remove the engine oil and the engine oil filter. Remove the oil filter adapter. Remove the starter.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...