Questions & Answers for: chev engine timing marks

...chev truck with a 350 engine with a timing lilght what are the steps to time a 1994 chev truck with a 350 engine with a timing light? engine idle and then check strobe light to mark on crank ,then ...

...chev engine. have the crank no problem. remove the rocker cover and look at the back of the cams first ,also turn over with a socket and rachet before you try to start engine.-not sure as never seen ...

...chev nova with a v6 the battery keep dying every time i try to crank it. Looking at the crank shaft pulley, you should see a timing mark on the front gear cover and then there will be marks on the ...

...engine 4 times to bring back to same location and that nothing like pistons bump into valves etc. and make sure that timing marks are at the location. If you install backwards on some engines the oil ...

...Chev Suburban 350 4wd 1/2 ton. Blew head gaskets at about 340,000 miles on the engine. Removed, repaired and reinstalled top end. Fired up on first try. Runs smoother than ever before. Never had ...

...Chev S-10 Blazer - Replaced Intake manifold gasket and =now I have a check engine Light - Crank sensor problem - why would this come up now and what can I do to fix it I would verify that the ...

...Chev silverado Underneath the hood is the engine.On top of the engine is a big plastic cover, cover entire top of engine. Example: ...

...chev 1500 Silverado with a 5.7 motor. Do you know where it is There isn't one. The vortec engines did away with timing light based ignition timing. The distributor can be adjusted, but it adjusts ...

...chev 4.3 L is a v6 chain driven and the valve timing is correct when the two dots line up with each other if it is the ignition timing that you are talking about you are probably 180 degrees out in ...

...chev lumina apv 3.1 does not advance and retard eng timing after instaling a trailor plug please help trailor plug please help ????? trailer plug ? Your not making sense , How do you know the timing ...