Questions & Answers for: check transmission fluid level 2001

... BUT I JUST ASKED WHAT THE SMALL RECESSED SLOTTED CAP IS FOR, THAT IS TO THE LEFT OF THE MAIN FILLER CAP ON THE BRAKE FLUID RESEVOIR. 2001 S4 AUDI. IF YOU KNOW PLEASE BE KIND ENOUGH TO ENLIGHTEN ...

...for coolant. The fluid for your transmission is not normal fluid. You have no business owning an Audi if you cant afford repairs because they are not cheap. If you want a cheap car buy a

transmission fluid in error. Where do you pout it back in. The same place where the dipstick( to check the level) is..I think it's on the right side of engine..be sure what you putting in is the right

...check transmission fluid on a audi a3 1997 IF TRANSMISSION DONT HAVE FILLER TUBE AND DIP STICK.YOUR VECHICLE HAS LEVEL CHECK PLUG ON TRANSMISSION OIL PAN TOWARD EXHAUST END.YOUR VECHICLE HAS TO BE ...

...check when transmission oil temperature is too low results in overfilling, when too high results in underfilling. 2. CAUTION: Too much or too little ATF will affect the operation of the transmission. ...

...car moves really slow... it sounds like the gears are stripped inside the transmission. check the fluid level, not sure but it may have a sensor which wont allow it to function with low fluid

check trans fluid You have to raise the car, and unscrew the drain plug on the transmission cover. This will show the fluid level. The car has to be warm and level. There are no dipsticks because Audi

...check brake and transmission fluid levels? If it is near the tire it is brake fluid. The brake fluid reservoir is back by the firewall driver side of engine compartment. Your car uses DOT 4 brake ...

...transmission fluid. Had a similar issue. The leak though, in front of the left-front tire was the windshield washer pump seal. Check to see if that fluid is washer fluid. If so, then thats likely the ...

...transmission fluid to an 2001 Audi a6 Quattro 2.8 Transmission Fluid Filler location - AudiForums.com www.audiforums.com > Home > Audi Models > Audi A6 Apr 20, 2017 - On the 2.8 you need to jack the ...