Questions & Answers for: check temperature sensor whirlpool water

...Check the water temperature sensor wiring for corrosion or breaks. Remove the wiring harness from the temperature sensor and measure the resistance of the sensor. Refer to the chart below and if its ...

Try this Unplug power chord to the washing machine . Check connection to water heater . Check resistance of heating element . Check the water temperature sensor and connection to it. Hope this helps

...to water heater. 3. Check resistance and continuity of the heating element. 4. Check the water temperature sensor and connections to it. 5. Check the water temperature sensor and connection to

...to water heater. 3. Check resistance and continuity of the heating element. 4. Check the water temperature sensor and connections to it. 5. Check the water temperature sensor and connection to

...Check the water temperature sensor and connection to it. Refer to the Water Temperature Sensor section. Now I have tried to help you. Pleas help me and rate/vote this response. Thanks and good luck. ...

...Check the Temp Sensor and the High Limit sensor on the system. Make sure the heater light is coming on. if the heat light is not on then the pressure switch is not working but I am thinking more like ...

...check the sensors to see if they are reading correct. if the lower sensor is reporting too low a temp the controler will stay on till the upper sensor detects an over temp. or how is an over temp ...

...Check the temperature sensor connection. The sensor may be moved out of place or disconnected. Remove it from the plug and plug it back in to reset the connection. If the error appears again, replace ...

...power. 2. Check connection to water heater. 3. Check resistance of heating element, if present on this model. (abnormal = infinity) 4. Check the water temperature sensor and connection to