Questions & Answers for: check fuel pressure 2000 pontiac

...check fuel pressure on a 2000 grand am SE? i was told to make sure it's at 40 psi. how do i do that? there is a check valve on passenger side of fuel rail. connect to pressure gauge and turn the key ...

...fuel pressure, no codes but the egr valve was sticking replaced it then the fuel filter ,pluges wires and air filter still won't rev help save the rest of my hair K.J. Throttle position sensor sounds ...

pontiac gand prix (2 door). Yesterday morning it would not start. It's trying to catch but it won't start. Tried dry gas, still would not start. What could be the problem? You hear it trying to start,

pontiac gand am SE (2000) and my stereo says its locked?? what should i do? you will have to get the unlock code from the previous owner or just buy another stereo which will most probably work out to

...2000 Pontiac Gand Am If you check around, I think you will find that the price varies considerably (like from a cheapie $59.99 upwards to $200.00. Independent shops are almost always cheaper than ...

check the level, but don't know which port to use when checking it, Can you identify the port for the low pressure side of the AC system for me ? Thanks. the large port is the low side. if the cap

...causing this ? The fuel pressure regulator has a check valve in it ti keep up fuel pressure when the engine is not running. There is a test port on the regulator to connect a fuel pressure test

...a low fuel pressure problem random misfires are predominately fuel pressure related rather the electronic check pump operation , pressure regulator, filter , and EVAP for not venting the fuel ...

...check fuel pressure with a fuel pressure gauge ? Did you check for spark at a plug wire ? What short did you have in the dash ? There are videos on youtube on trouble shooting a no start condition ...

2000 Pontiac Grand Prix. Will the parts of a 1996 Pontiac Grand AM fit on a 2000 Grand Prix? They look identical. Seats, air conditioner pump, tires etc. Question edited for clarity. Question moved ...