...check the vacuum pressure and say he doesn?t like what he is seeing. (Say something like gas is dumping in the engine too rapidly) not clear to me what he meant. He said apart from what is going on ...
Question about 2004 Silverado 1500 Crew Cab
...check engine light on the dash. Without that being mentioned I'm going to say it's your gauge cluster that has gone bad. That is good news that:. GM has had a issue with the clusters in the 2003-2005 ...
check for spark. Pull a spark plug wire off from a spark plug. Push a screwdriver into the boot to the metal connector. Hold the shank of the screwdriver about 1/4" away from a metal engine part. Have
...check engine light seems to work because it comes on as it should when you turn the ignition on, but does not stay on or blink on. Problem: Truck idles great at what looks to be about 500-600 RPM. ...
Question about 1993 Sierra K1500
...check engine light came on. What can I do to fix my problem? Put more than 3 gallons of gas in your tank- $20 = 3.5 gallons here. The bottle of cleaner specifies how many gallons of fuel is to be ...
Question about 2009 Sierra 2500HD
...is no surge Fuel pump needs time to build up pressure . Do this by turning the ignition on for a fer seconds before you start the vehicle Check the ECT Engine Coolant Temp sensor for proper
...Check engine light is blinking, stability indicator says needs surface, and traction control indicator says it's off. Please advise It's misfilling could be anywhere from foul injectors, traction ...
Question about 2007 Equinox LT1
...Check Engine Light. This may be caused by spark plug wire boots that do not provide a sufficiently robust dielectric seal to withstand the high voltage required to fire the spark plugs. Special ...
Question about 2007 Equinox LT1
...check coil packs. Still not running right and this morning now it won't start. I need some help please. When it first started all dash lights would come on and off. My engine light would blink. ...
Question about 2007 Equinox LT1
...check engine light come on and stays on. How do I correct this? Hook up a professional grade scan tool and read DTC'S - diagnostic trouble codes. then get service repair info. www.alldatadiy.com and ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions