Questions & Answers for: check base power uniden

...washington CB radio,thank you. The washington base doe's have an internal speaker. The low level you are hearing is coming from the ac power supply. Try checking power supply componants for

...base. Check the phone connector underneath the base (RJ11 squared plug). Put back battries on handsets. Place handsets on base. Connect base back to power with handset sitting on base. If that does ...

...of the following reasons 1.The handset is far away from the base unit.Try to bring the hand set near the base unit and try. 2.The base unit is not plugged in to the power supply.Please check it. ...

...Check that you have power (eg. Led indicator is on) to your Base station. If you have power to the base station and you still do not have a dial tone, plug in a non-cordless handset to the phone ...

...base or the replacement handset). Check the appropriate manual (see below to find the manuals). For the DECT4096, press Menu on the base and then navigate to Handset Register. When you see Handset ...

...check that the base has power before you go farther with the above diagnostics. The power brick should be warm. We had a cordless phone on a power strip (UPS) that got turned off. The handset was ...

...handsets read "searching" check base station device is powered . If the base station has power and is properly connected the base station has burned out and you will need to replace the phone

base. Check for any radio interference. Check if the handsets are registered. You may need to de-register them first. Try unplugging the base (power and phone line cord) then remove the batteries from