...ball joints on older model chevys but this one looks different so I wanted to be sure before I start on it. Will the new ball joint have to be pressed in? Or is it possible to drive it out after I ...
...ball joints? double check that.depends on gvw 2.worn out tapers in knuckles 3. did the new ball joints come with washers to put under the nuts to get the castle nuts in the right spot and did you use ...
...they were ok...when I engaged the 4-wheel drive it got much worse...any ideas where to start? Chk. wheel bearings and axel cv joints, and also steering componets and ball joints. Chk. rearend
Question about 1994 K1500
...ball joints c v joint in way to put spindle back on. 1994 chevy 3500 pick up If you cant slide the spindle back in place because cv joint is in the way , you dont have your axle pushed in far enough, ...
...like there are pressed in revits, do I drill them out? Or do they need to be broken out with some type of splitter? Yes you can drill them out. The new ball joints should come with nuts &
...ball joint broke off of socket on 97 chevy pickup how difficult is this to replace? if its original its not that bad just have to cut the rivets of the old ball joint body and remove it from the ...
...box and power steering and ball joints have been replaced. the ball joints have been replaced 3 times in the last 2 months due to difective parts. tires may be to big or alinment is way out of ...
...the upper and lower ball joints. seperate the spindle and the axel should come out. the rest is standard procedure to change a ball joint. let me know if it's enough info or if you want more
...ball joint in g-20 chevy van jack up and support truck remove tire and with jack place under lower control arm and jack up to just relieve a little pressure on spring chain or use [can rent or borrow ...
...ball joint says 74 ft lbs outer tie-rod says 47 ft lbs. Any specs your given on the internet you should try to double check. All I can do is post what my database showed. Hopefully the database is ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
