...back. 2) Go into the Channel signal source menu and select either the Air/Antenna or Cable option. 3) Go into the Auto Program Scan menu and SCAN in the channels. Now you can watch available
...signal strength meter. Remember to do another channel scan after you have adjusted your antenna. Television stations broadcasting in digital use both the VHF band (channels 2-13) and UHF band ...
...available channels I tried on auto program and tried entering the one at a time and it wont pick them up Well, remember that in USA all olds tv do not can receive signal because the new signal ...
...channel buttons would produce a signal only with available transmitter stations. Performing a channel auto scan would display no signals without available receiver devices often acquired with ...
Scroll down to the signal source. Select the signal source you have connected to the back of set. Scroll to SCAN in the menu. SCAN in the channels. Exit menu mode. You can now watch available channels
Question about Wireless G Plus MIMO (F5D9230-4) Router (1010835)
...signal strength is very low You Can Try Changing the Wireless Channel on the Router you have 11 Different Channels Available. > Steps to change the Channel - Open Internet Browser on Hard wired ...
...signal message will appear). You should check antennaweb.org or tvfool.com for the channels that are available in your location depending on how the antenna is pointed. (Hills, tall buildings and ...
Question about Wireless G Plus MIMO (F5D9230-4) Router (1010835)
...channel that I receive (CBC), but does not bring in the other channels that should be available. I have rescanned several times. But the antenna u bought it is a digital antenna design though.Digital ...
Question about Wireless G Plus MIMO (F5D9230-4) Router (1010835)
...signal using co-axial connections An antenna on one end of the coaxial cable will get signals. The other end can connect to your TV. Then in the menu on the TV you have to select 'antenna' instead of ...
Question about Wireless G Plus MIMO (F5D9230-4) Router (1010835)
...channel produce a very strong frequency. The signal strength and quality can be checked for each channel by selecting options in the menu in order to check this theory. The problem might be solved by ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions