...8 plug, each ring is a channel one for left side and one for right side. You need an 1/8 cable that has 3 rings on the plug, 1 for video, 2 for Left and right audio channels. It dosen't have to be an ...
Question about AMPLIFIER, 1000 WPC, DDT, 8/4/2 OHMS => Model PV2000 Car Audio Amplifier
peavey 1500 PA amplifier, no output from channel A 2 channel amplifier A and B, but channel A there is no output but channel B works as normal, I've check both speakers are in good condition is amp ...
channel 8 i bought a brand new midland 100z CB. When i hook up the power the display screen for the channel only lights up on the left side by a number 8. I try changing channels but nothing happens??
Question about EUROPOWER EP2500 Amplifier
8 ohm channel b will this hurt the amp If you only have 3 (8 Ohm) Speakers and want to hook them all up, you will need to balance the impedance of the sides or you will be too loud on one side and not
Question about Europower Pmp5000 Powered Mixer Pmp5000
...8 ohms this is around 5 amps or 225 Watts. Please read my tip on Fixya about the ground hazard of channel A when using 1/4 inch cables out of the PMP units... essentially the BARREL of the connector ...
8" adapter, and that both left and right channels are plugged into the mixer, preferably on the first two inputs to test and see that both channels are indeed coming through. Then you may move them to
Question about Pmp3000 16 Channel Audio Mixer
...channel B (all speakers are 8 ohm). Also should speakon cable have 4 connecting wires. I opened one of my speakon connectors (NL4FX) and it was only a two core cable.? Yes, you can put two 8 ohm ...
...channel Audio, AC'97 interface (Realtek) - 10/100M LAN (Realtek) - 8 USB 2.0 ports ...
Question about Pmp3000 16 Channel Audio Mixer
...channel @ 8-ohms and 4-ohms on the Behringer PMP3000? The manual states 215 watts per channel @ 8-ohms and 450 watts @ 4-ohms. This isn't correct is it? I've read, from a couple of ...
...this will be a 4 ohm load on each channel. Series (not recommended): Wire + from one side of the woofer to - of the other side of woofer. Wire the other + and - to the amplifier to give an 8 ohm ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions