Questions & Answers for: changing rear drum 2004 focus

...changing rear brakes and will not go out. i tried to bleed the brakes and still on. Ok the reason I ask is that will help to pinpoint the concern. See ABS system when you first turn the ignition on ...

...rear drums the ABS light is on After replacing rear drums the ABS light and the traction control light are on continuously. I don?t think that I damaged the sensors. How do you reset this problem ...

...is the abs ring on the ford focus rear drums????? does it look like an oil seal on the on the bearing The ABS reluctor is built into the rear wheel bearing assembly, and it must be replaced as a

...focus my abs light stays on on my ford focus when the ABS light stays on it means there is a fault present in the ABS system and the ABS has been disabled, as long as the light is on u just have ...

wabbling and grinding noise coming from rear of 54 reg focus and abs warning light has come on thats BAD....ck brakes and wheel bearings for rear. ASAP

...rear brake drum on a 2002 ford focus xtw Ford Focus rear drums are held on by a nut in the middle remove the cap in the center and then remove the nut, new drums come with the bearing as well. ...

...changing the rear drum brakes on my 05 Focus the ABS light is on... I unplugged the sensor lead from the cable and undid the nut that holds the sensor in the drum in order to remove the shoes. ...

...rear drum bearing needs replacement and since my drums are on their way out I bought the whole new drum with bearing installed. Problem is no snap ring for abs and they are 64$ at the dealer each. ...

...rear combo drum/bearing on a 2007 Ford Focus. NAPA told me that, as far as ABS goes, there is no need to remove anything from the old drum/bearing and place on the new one. Supposedly this ...

abs warning light is on after replacing the rear brake drums, rotors, brake shoes, and brake pads. The abs warning light is on. You may have accidentally damaged the wheel speed sensor. Have it ...