Questions & Answers for: changing power steering fluid 2004

changing headlight 300m How do i change/replace the headlight bulb for my 2004 chrysler 300M?? (Passenger low beam bulb) lift the hood. the light are down behind the light assembly. simply turn large ...

...power steering flush and had serpentine belt replaced with no improvement. 103,000 miles recently had new rotors and pads. Possible tie rod or ball joint problems? Sounds like the serpentine belt is ...

changing the expansion valve and dryer accumlator, the bolts that connected the valve both broke and need to remove complete thing to be able to heat and release from the core, dash is apart but can't

hard to steer at low speeds. repaced power steering pump. better but not fixed 2001 chrysler 300m. if you rev rpms it is fine Press Reply or Accept I can fix This Bruce

power steering pump- only accessible by removing the oil filter and using an extension and a u joint BUT FIRST: lower the anti freeze in the system by draining some fluid. But anyway- THAT'S where

POWER STEERING In the morning when vehicle is first started the power steering doesn't work and eventually gets better as you start driving it. Also it seems to be leaking fluid or burning up fluid as

...Typically, if it was a belt, the pitch would change with RPM of the engine. Whining noises can sometimes be attributed to an idler pulley, alternator, power steering or waterpump bearing going

2004 chrysler 300m transmission drain plug Where is the transmission drain plug on a 2004 Chrysler 300m does not have drain plug, on this car you have to remove the oil pane if you want to change or ...

...also, my battery light came on. There is plenty of power steering fluid and no leakage stiff or hard to turn steering wheel, check engine and battery light is on Sounds like a broken serpentine

...power steering fluid is running out and my steering wheel is locked. How can i figure out where its coming from? The quickest solution I can think of would be to add some AT205. AT205 is a glycerin ...