...using the dry finger on other hand to hold the door switch start the dryer and using wet fingers place on both sensors, if it doesnt change to damp or wet it could be the sensor or the user
dryer door is reverseable, but the washer door isn't. Do they make a right hand kit? nope sorry but all front load washers are built with a locking system on the door and that makes them impossible to
...Dryer door pops open making dryer shut off. How do I repair, please? Hi, there sould be a two piece door catch. One piece on the door and another on the front panel that the door closes to. Look at ...
...LG Dryer - DLE2101W UNPLUG the dryer. Take the front kick panel off. Take the door off. Lift the top and rest it on something. Remove whatever is in front of the drum. Remove the drum. While you have ...
lg dryer replace drum rollers How do i change the drum rollers? never lubricate a drum roller ,it will attract lint and hold it like a magnet possibly making your problem worse. graphite lube possibly
...lg dryer? The door switch might be bad or, out of alignment or, "gunked up". The sensor wire to the door switch might have come loose or broken - check the continuity of the wires (Ohme them from end ...
LG dryer doesn't turn on Dryer does not turn on, their is a light in the drum. already checked voltage, changed fuse, changed main board. Please help is the door switch ok?
lg dryer doesn't turn on it has a light in the drum. already checked voltage, thermostat, replaced main board and still does not work. Having changed the main control board, the only other things to ...
Question about LG SteamDryer DLGX2802R 7.4 Cu. Ft. Steam Gas Dryer - Wild Cherry Red
...LG GAS DRYER NOT ADVANCING TO COOL DOWN CYCLE? MY DRYER RUNS DOWN TO 6 MINUTES AND THEN AUTOMATICALLY RESETS ITSELF TO 16 MORE MINUTES TO RUN AND NEVER SHUTS OFF UNLESS I OPEN THE DOOR. IT IS NOT ...
Question about LG SteamDryer DLGX2802R 7.4 Cu. Ft. Steam Gas Dryer - Wild Cherry Red
LG electric dryer won't start, all that works is the drum light limits and thermostats not open, door switch and belt switches good, 240 v present at control, replaced boards, no change Did you try ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions