Question about Soft Light Supreme U4262-930 Bagged Upright Vacuum
...change the belt on my sweeper and dont have the manual.. Its also not obvious. please help! Turn the machine over so you can see the bottom. If you look carefully at the plate that covers the roller, ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
SWEEPER WITH THE EXTENSION HOSE AND NOT PULL THE MACHINE OVER, HITTING ME...AND FALL CRASHING TO THE FLOOR" This is an Engineering Statics 101 problem for you housewives. Since these Hoover "engineers
sweeper. I had found one to buy, but still I knew that I would miss the Shark vacuums. Well, tonight I took the second one apart again and looked at areas where I might have missed any hair or strings
Question about SR12 Sensor Bagged Upright Vacuum
...change the belt on a Windsor Sensor S12 upright sweeper? Step 1. Remove the vacuum bag housing so that you are only working with the power nozzle or the bottom portion of your Sebo, this will make it ...
Question about Generation 3 Bagged Upright Vacuum
the belt over the motor shaft when using the carpet sweeper. Pay attention to the half twist in the belt when installing--there is a cast-in diagram for this in the sweeper attachment. Hope this helps
SWEEPER SMELLS LIKE SOMETHING BURNING, BUT WORKS WELL. DOES IT NEED A TUNE-UP AND CAN I DO THIS MYSELF? I would check if the drive belt has a scorch mark on it, you may have caught something that ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions