Questions & Answers for: change spark plug pressure washer

...the plug to check for spark and no spark. Can you give some troubleshooting help. THANKS new spark plug? flooding may have fouled the old one. no spark from the plug? you have to change the

...spark plug, added new gas, and checked spark plug fire for ignitition will not start You can try spraying some carburetor cleaner into the carb. If it starts for a minute, your carburetor need ...

my pressure washer seem like it is not getting gas you could be out of gas, the gas line could be clogged with debris, your spark plug could need changing, or it may be disconnected.

Craftsman 6.75 horsepower pressure washer model no. 580.7527000 I starts and then shuts off.have change spark plug. still runs a short time and dies. Replace the gas, check the air filter is not clean

...spark plug. I even changed spark plug. Use the unit the other day, shut it down and on restart it won't start. Also, I disconnected the kill switch and the il lvel sensor so nothing was going to ...

motor will not start I have changed spark plug and air filter fist check that there is spark. if there is spark then it may not be getting fuel.clean carby & fuel lines. make sure fuel tap is on.

...160 pressure washer won't start. change the spark plug and drain the fuel in carb, still won's start. any help? Try this website at ...

...the spark and send it to spark plug along with the gas combution get the engine started.that coil some time goes bad and have to be change.if you have electric starter. check the starter also.good ...

...spark plug. Spark plug is soaked every 2500 PSI pressure was used for about a year and then would not start again after being used 30 prior. I've changed out the gas and replaced the spark ...

...spark plug. My pressure washer have not been used in about four to five months it was working fine. I have changed the oil but it still does not started, don't know how to check the spark plug for a ...