Questions & Answers for: change rotor 2000 gmc jimmy

Question about 2000 Jimmy

1 Answer

...change :::: ignition module , crankshaft sensor , ignition coil, wires ,rotor , cap , the sensor goes in the distribuitor and it still dont have spark .... thanks for any help do you have access to a ...

Ad

...change the front hub assembly on a 2000 GMC Jimmy what tools do i need to take it off a diagram would be very helpful a cheater pipe to help get leverage and a 18mm socket. remove the caliper and ...

Ad

2000 Jimmy running one second and just won't start the next. Will crank but no fire. Changed fuel filter and while doing so turned key and swa fuel pump working. If no check engine light is on, I ...

2000 gmc jimmy was running rough i was told it was because it had a pluged cat. i had it by passed ran sea foam through the tank to de-carbonize the engine i also changed the plugs, cap, rotor, wires,

...rotor should be pointing directly across (on the opposite side of the flat edge of the distributer). when looking down on the dist. there is a flat edge. once you get it installed you need a scanner ...

Question about 2000 Jimmy

1 Answer

...change lower ball joint u need 35mm nut socket to remove wheel nut then remove brake caliber and rotor then you to with a gear puller pull the wheel axle from cv shaft ,then remove upper and lower ...

Grinding and rubbin when breaking, seems to be getting worse. Only happens when breaking. Get your brake pads replaced. Sounds like the brake linings have worn down to nothing, and you are now metal ...

...2000 gmc jimmy the cylinder is misfiring and check engine light is on. i just changed the oil filter. replace fuel filter, air filter, spark plugs, wires, distributor cap /rotor, if you have one. new ...

changed coil ignition module cap and rotor a week ago, now doing same thing again, it'll turn over all day long has fire but won't start like it has no fire. changed coil ignition module cap ...

2000 gmc jimmy it will turn over but wouldn't fire all the way to the spark plug wires so changed the coil distributor cap checked the rotor and distributor both appeared to be fine but now the timing

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...