Questions & Answers for: change riser

...that are specific for the superglide. they raise the bars 2" back and 1" up, without all the cable changes. a little expensive, but these also maintain the proper instrument alignment angle that ...

...of the system. Had D' marked checked from vendor, had the risers checked from the riser vendor. Changed out whole phone system and problem still exists? any clues? So, when line 1 rings in, it ...

...initial installation Two Gigabyte boards are facing same problems, Front audio not working. I changed the total socket and checked up. checked by changing the cables. back audio speaker and mic ...

...and you can get to the riser. Loosen the top bolts of the riser and adjust the bars. Unless they've changed something, this should work. Good Luck ...

How to change the handle bar risers on my 04 road king? Hi Fidel850, for more information on your question please visit the websites below and good luck: replace riser bushings on harley roadking

...keep in mind when changing H-bars, not only the height but the width as well. If you're going to change H-bars, plan on lengthening all wiring and replacing cables and the brake hose. Good Luck ...

do i need to change the clutch cable after fitting risers to a rocket 111 touring I would say yes, but it depends on how much slack there still is in the cable and if it can be secured to the new ...

...riser bushings are made of rubber sandwiched between to metal tubes. They are a loose press fit in the upper triple tree. Measure the depth of the old bushings, drive them out, and then drive the new ...

Just changed the bars and risers on my sportster/nightster '09. Front indicator is now not working. Any idea's? Lost the front left hand indicator since I have changed the bars and risers. ...

...my handlebars 1.5 to 2" I get sore neck , shoulder! Any suggestions if possible without making big changes! Different bars or back riser? If you shop around there are plenty of styles of handlebar. ...