Questions & Answers for: change plugs 03

...i'm having issues with it the engine misfire and light is constantly on. i have change the plugs, oil, gas, fuel,but the problem is still there? i need desperately need your help check the HT ...

Ad

Question about 2003 YZ 250

2 Answers

...03 motors for yz 250's.? thanks for 02 yamaha put the balky yz426f tranny in the yz250's, just for duribility tho....other than that yamaha manufactures might do a slite rejetting, maybe a head ...

Ad

...am mechanically inclined. Make sure the plugs are gapped to spec, before installing, check condition of plug wires as you do the change, or change them at the same time to be sure. Hope this helps. ...

Question about 2003 FLHTCUI Electra Glide Ultra Classic

1 Answer

i have static comming through the speakers on my 03 ultra Have you changed the plug wires on bike recently? If so were they of the proper resistance? If not , then I would start by having the plug ...

Question about 426290 AM/FM Radio

1 Answer

...03, and what would I need to change to make it work? The 23 pin main connector is a direct plug in from the 03 bike to the HK unit. The only issue would be if the original 03 was using the accessory ...

Question about 2003 Grand Prix

1 Answer

...my 03 gtp is shooting a random misfire code, i changed the cam sensor, plugs wires fuel injectors ect. it stumbles if you give it a lot of gas , but idles fine,any ideas??? It may need a "CASE

Question about 2003 Durango

2 Answers

...right brake light out I have '03 Durango and my right brake light seems to be not working. I changed the bulb and checked the fuses. Still no light, my left one works fine. Any suggestions on ...

Question about 2003 Maxima

1 Answer

change spark plugs Its a complete guide.It has step by step instructions to replace the spark plugs on 2003 Nissan maxima.Click the link below and follow the detailed instructions with proper diagrams

...plugs on my 03 and set the gap at .44. After I finished the car idles low. It seems to accelerate fine. You can adjust the idle screw that is at the end of the accelerator cable to increase the idel ...

...change the plugs the distributor cap the Roeder and plug wires I am still not getting any fire what could it be I think I might have ran out of gas also but I put 10 gallons in the tank and it still ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...