Questions & Answers for: change oil pump 2000 silverado

Question about 2000 Silverado 1500

1 Answer

lose of oil pressure Will i have to raise my motor to get the oil pan out, so i can change the oil pump. I have a 2000 chevrolet silverado 1500 2wd. yes you will not be able to clear the pickup

Ad

...oil change code. I need to know the procedure to reset the change oil on the odometer. Turn the ignition key to the run position and pump the accelerator 3 times within 5 seconds. Please leave ...

Ad

...change a oil pump in my 2003 ? i had the truck out and i lost oil pressure and every time i give it a little gas the oil pressure goes up do you think the oil pump is gone and do i have to take the ...

...oil pump pickup, restricting flow. The only other cause of low pressure would be worn engine bearings, which would not happen just by changing oil pan, unless you messed with either bearings or pump ...

Question about 2003 Silverado 1500

1 Answer

change the oil pump? Go to your local public library and check out a service manuel for your truck it will have step by step directions on how to change the oil pump (just a caution to change your oil

Question about 2005 Silverado 2500HD 2WD

1 Answer

...Oil Change Reset After changing the oil in my 2005 Chevrolet Silverado 2500HDd 4x4 how do I reset maintenance light or make sure that it knows that the oil has been changed? Not positive 05 is the ...

...change the fuel pump on my silverado 1500 yr 1999. original wiring is a 4 wire plug and a 3 wire plug. replacement pump is 4 wires. need to know which wires to use, and what to do with remainder of ...

Question about 2000 Silverado 1500

1 Answer

...change oil message on dashboard. I had a 2000 Chevy Silverado 5.3 liters and just changed the oil but still get the message. And, is it better to change the oil every 5,000 miles or when the change ...

Question about 2000 Silverado 1500

1 Answer

how do i change the oil pump on my 2000 chevy silverado how to change a/c oil in 2000 silverado?

...change oil light on 2000 chevy silverado With key in ignition, turn key forward but do not turn vehicle on. Once key is forward, step on gas pedal 3 (or 4) times. This should change message on IPC ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...