Questions & Answers for: change oil pressure switch 2000

...oil pressure sending unit located? where is the oil pressure sending unit on a 2000 buick leSabre The pressure sending unit is located on the passenger side rear of the engine just above and slightly ...

Oil pressure gage registers 129lbs on my 2000 Buick Lasabre Limited You either have a bad sender, poor connection, or a bad guage. Replace the sender first. 40 psi would be more like the proper oil ...

...days ago. It is now reading a constant 130psi. I suspect the oil sending switch is the problem but I'm not sure of its location. Help please. Dave It's on the housing the oil filter is screwed on

...oil pressure,I would not say piston rod bearing or main bearing, cause there's no knock noise. You will have better oil pressure when cold due to oil much thicker. so I would forget about a bad oil ...

...oil pressure gage shows 29 idling up to 65 while driving at 40 miles an hour. What is the oil pressure supposed to be in a 2000 Buick LaSabre? 30 is ideal for idling im my car at around 35mph its at ...

...on. got oil change-still on. do I need to replace the oil pressure sensor or switch. If so, where is it located. if you ran it that low when did you change it last it could be to thick and ...

...oil level is good but when driving the oil light comes on and off. The digital display gage jumps aroung showing oil pressure from 0 to 75. Could this be a oil sencer unit? yes cange oil sending ...

2000 buick lesabre custom oil in the coolant I have a 2000 buick lesabre custom that has oil mixing into the coolant. i recently changed my oil and found the coolant was discolourd, i think it is the ...

...oil change. So I had it changed right away. Problem still exists. Any help would be appreciated. Thanks Next thing I would check is the oil pressure switch. I have put two of these in my wife's Park ...

...oil pressure sensor on 2000 Buick la sabre Why did you need to change it? Did you have low pressure? Is the sensor telling the truth? You may have to get a mechanic to rig up a manual gauge to your ...