...master cyl (clutch), or slave cylinder, in any case the leak would have to corrected first. the reservoir should be located near the brake reservoir normally a little to the left or the brake master ...
...can't change gears. Does it need new clutch or something else. Usually it is the master cylinder for the clutch. It is located on the firewall directly behind the clutch pedal. Please Vote!
...clutch the gear links are not engaged. Possible that the master cylinder has failed, possible a leak in the system.You will need to overhaul this section and the pedal will respond. Also ...
Question about 1999 Sonoma
...on how to fix? New clutch and master cylinder within the last year. Did sit from time to time in the last year. If the engine does not crank sometimes, you would need to test the clutch safety
How do you adjust the clutch position pedal on a 99 gmc sonoma if you have this system it is not adjustable the cylinder might leak inside bell housing or clutch is wear down hope it helps
clutch master cylinder low on fluid is it a sign off a bigger problem??? Only if it has a leak somewhere. Not that many places to check. Sometimes the master will leak, and you will have brake fluid ...
...in clutch and clutch worked perfectly before project.I had to change my steering column and bent clutch rod in proc replace and, adjust clutch rod and. then: fill & re-bleed clutch master ...
Question about 1998 Sonoma
...a clutch pressure plate throw out bearing or slave cylinder or the master cylinder? If the pedal is up then the hydraulics are good sounds like the disc or pressure plate went out and strange
Question about 1999 Sonoma
...1999 gmc sonoma which I recently had clutch replaced however it still won't go into gear. Any suggestions as to what else it cold be? did you have it pro replaced? If so, you should take it back to ...
Question about 1999 Sonoma
...if I start the truck in gear it moved and if I take the truck out of gear before I start it it won't go into gear replace the faulty clutch master cylinder or cable replace the slave cylinder as ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions