...lower control arm bushing again. i also had the oil changed and part of the oil change service includes the lube service, of which the steering stop bushings were lubed. the noise is gone. i have had ...
...lower control arm and bushing on the front passenger side,If so why do the auto stores not sell them they say not a part for the 2008 colbalt Auto part stores rarely even carry lower control arms for ...
...the air senor switch in a 2008 ford fusion The mass air flow sensor is in the air intake tube at the lower left corner of the engine compartment. Please rate this info That will help me THankyou ...
...lower control arm with new lower arm ball joints. Doubt many shop use book time They charge you what ever it takes You don't loose time on one job & overcharge a customer on another This is a ...
...change d shock absorber,complete upper arm,stabiliser linkage bush,lower arm ball joint,lower arm bush,yet I still ear dis noise like the ball joint is bad.any help to resolve this issue? did you ...
Question about 2006 Fusion 1.6
...change the control arm bushings here is how to change control arm bushings on an 06 fusion. just type in on pc browser, (how to change control arm bushings on 06 fusion.) then click on 4th link down ...
Question about 2008 Pilot
...change my lower control arms as struts after everything was complete start the car up my ABS VTM-4 VSA and control light came on and wouldn't go away. What could be the problem? Did you reconnect the ...
change the whole thing as a unit. You need to remove the wheel and brake caliper, rotor, hub nut, and sometimes have to take off the swaybar end link and pop the lower ball joint to separate the lower
Question about 2008 Lancer
...lower control arm in the front of a 2008 Mitsubishi Lancer How do u replace the front lower control arms of a 2008 Mitsubishi Lancer. I can't get the bottom bolt off that connects to rotors get a ...
Question about 2008 Lancer
...lower control arms just had it all allined got it back now it seems like it is stuck in 1st gear It could be. Did it start right after the front end was done? The transmission control cable may have ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions