change th light bulb in my brake light. Can I just change the bulb or do I have to buy a new entire rear light? The bulb in the rear light has burned out and to replace it follow these instructions: 1
...change the lights from low beam to high If the switch clicks I would try a new headlamp. I have seen numerous times when both bulbs burnt out.. I also belive their is a fuse for just the high beam on ...
light stopped working. bought 2 new "bulbs" neither of them work either. psgr side works fine always has?? original bulb does not look burned out Ok you can't tell anyone, but I changed the wrong bulb
...every bulb working correctly. When one bulb fails, you will notice a change in the flash frequency, as you describe. Replace or repair the bulb that is not working, and you should be good to go. ...
Replace turn signal bulb on a 2001 PT cruiser You simply remove the screws that hold the light in , pull it out, twist old bulb out and change it
LIGHT BULB EVERY 3 OR 4 2003 pt cruiser BURNING THE REAR SIGNAL LIGHT BULB EVERY 3 OR 4 WEEKS I bump into the same problem wrong brake light bulb try 3157LL . See if you have this brake bulb number If
2002 pt cruiser. Replaced tail light bulb but still not working. Some water in light assembly. The bulb socket is probaly coroded replace the bulb socket
how do you change tail light bulb on 2008 pt cruiser should be screw in base of unit, clip in the top, unscrew and pul , take unit out and access bulbs by turning holders in rear
...change light bulb on console gear shift indicator. Wife can't tell what gear she is in after dark. Automatic trans. 2004 PT-Cruiser I have 2002 Cruiser, not sure if it's the same configuration. ...
light bulb for console gear selector gear selector light bulb in console The bezel around the shifter pops up. Tabs on each side(left and right). pry up with a screw driver. I believe it is a 194 bulb
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions