Questions & Answers for: change input sanyo flat screen

change channels manually and have sound but no picture. I tried it on my Computer to see if that worked but again, just a blue screen. I DO NOT have the remote. Do I just chuck it out or is there hope

When I turn on the TV I get sound but just a black screen on all video inputs. change the RCA cable and be sure to connector vedio to video audio to audio good luck

input cables from the back and see if you still have a blue screen.Here is the link to Sanyo's Support site: http://us.sanyo.com/Customer-Support E-mail: support@sanyotv.com Phone: (800) 877-5032 Fax:

...screen Check your inputs. The no signal box means exactly that - there's no incoming signal for the TV to decode. So you've either disconnected a cable somewhere or turned off your input ...

...screen Menu screens look fine. Tuner and video input screens have dots across them. Looks like the display has developed some problem.  Try changing the input device to some other like a DVD ...

...screen stay's dark . Try changing the input device to something you are sure, works such as a DVD player.Switch off TV manually, switch off power, remove plug and retry after 48 hours.If ...

Sanyo dp42848 turns on but blank screen When I turn it on and the green power light comes on, the screen stays blank. I have tried to change the channel and the inputs, but still nothing. Even tried ...

sanyo 55" flat screen keeps going off out of the blue??? Change your Sanyo input to proper input mode (HDMI, PC input, VGA)

I have a Sanyo DP 55441–01 TV comes on but hook an HDMI component cable no video on the screen it shows no just says no video source Change inputs. You are probably still on tv.

...Sanyo LCD 32xr10f Tv showing screen saver message. We changed the cable to the aerial wall socket, but still not working. Tried retuning but got 0 channels, seems like no input signal. make sure the ...