...the seperate carts and removed any dry ink from the print head, but still wont print. I tried the hold form feed 4 times to see if that would work and it didnt. Change your cartridge and then try ...
change print head on canon i9900 I have the new print head. Have removed ink tanks It is held in by a retaining lever on the top of the transport carriage. It is the lighter gray plastic piece on top.
Question about i9900 InkJet Photo Printer
Canon i9900 printer will not print group 2 colors. Deep cleaned x 4-5; changed ink cartridges. Still won't print the group 2 colors. What's up with it. Set your printer at maximum quality and dpi
canon i9900 isn't printing photo magenta was printing great, changed ink cartrdge and now even after numerous clean, deep clean and manual cleaning the photo magenta isn't firing properly Use ...
...change the ink waste absorber on a canon i9900 Turn the printer off. Disconnect the AC power cord. Lift the lid to expose the print-head mechanism. Look where the ink-cartridges are "parked". The ...
...ink cartridge on my i9900, the cartridge carrier suddenly began to move. Because the cartridge was only 1/2 half way out, the carrier got stuck for a second or so at the side of the slide mechanism ...
...ink. All other colors print fine. Black seemed to get lighter one day and just plain stopped printing. Are my print heads warn? Do they need to be replaced or can I fix them? Try to use the clean ...
Question about i9900 InkJet Photo Printer
...change ink cartridges. It keeps returning to its concealed position. Is there an override? I open the lid to replace the cartridge and the printhead runs across to left then back to right, without ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions