Questions & Answers for: change fuse power board projector

...Change the fuse even if you cannot see any markings or discolouration on it. Good luck and I hope this is of help. If this doesn't work - just post another posting and I'll respond ASAP. Thanks for ...

...there is no power at all on the unit. Take of the top cover and change the fuse located on the Powersupply Board ( the one where the AC socket goes into) Should do the trick. Thanks for using Fixya

...fuse I can change? How can I troubleshoot the power supply? Thanks My 4805 made a loud pop noise and smoke and died. I thought it the bulb and wasted $340 on that purchase. They are subject to ...

...change the power supply or fuse on projector? Projector no power remove the top, front and rear panels (4 copper screws and 4 silver screws on bottom, 2 silver on back). there are 2 fuses for the ...

...fuse to replace? Is there a way to test it? try to change your power cord if problem occur change power supply board. The problem I can confirm is either one of two faults in the main power supply ...

...change would be the power input board, which is what the plug plugs into, if that isn't the problem, you can look at the glass fuse on the power supply next to the input board to see if it is blown. ...

...an internal fuse I am guessing it is the power supply. The problem is in the GB Board change the MCZ3001D in the side position of the GB Board and you must upgraded the prohector when change the

...fuse on the power supply board is probably blown. I purchased a "broken" one, same symptoms as yours, for $20 and pulled it apart to see if I could fix it. I just had to replace the fuse and it works ...

sony vpl cs5 is not powering on fuse on main board is good no lights no fans nothing.... any idea's? did you change anything in the unit recently

...fuse on the power board. I replace the fuse and put in a new lamp and still have now power. the red light will come on in the front but it will not power on. please help. its a sharp xg-e1200u When ...