Questions & Answers for: change default paper tray hp

error message? 1) Your paper tray may be too full, makes it heavy to lift and not enough pressure for the pick up roller. 2) Pick up roller is slippery, wipe it clean with alcohol to make it abbrasive

...menu. Look at the tray set-ups. Sounds like you have tray 1 set to casette. Change it to "first" and the size to "any". The printer will then pull paper from tray 1 any time you put something

...Plain Let me know if that helps to solve the issue. Regards, Nikhil. It might be looking for certain size paper in the tray 1 assembly. Change your printing defaults to AUTO in Printer

...rollers in the paper tray 2, check for wear. clean the registration rollers (under a metal flap under the print cartridge) do not clean the transfer roller (the spongey roller sitting under the

paper into tray 1, chose to print a configuration page (forced to print from tray 1) then reloaded tray 2 with paper and the error was gone. ( I actually did a factory reset before these steps but try

...it up etc,dont just put paper in the tray and leave it,these machines would have to be extremely sensitive to be able to load correctly every time,i dont know why the same model isnt ...

...default on the paper trays? Will that fix this problem? Please help me, Kathleen. Becouse the tray configured in the printer is tray #1 so it serching the paper on tray 1 first you can set it the ...

Tray 2 paper senor not sensing the paper either it may dusty,failed or sensor flag mis placed.. verify where is the fault..Location: remove tray2 cassette, under you can observe the paper sensing flag

...paper from tray 2 My HP LJ 2420 will not pickup paper from tray 2. It will only work from Tray 1. Unfortunately I need both trays. What will happen is when I go to print to tray 2, it will make a ...

change the default on my HP P30005dn to Tray 2? I get notice that my printer has no paper - Manual tray is Tray 1, loaded tray is tray 2 Normal default on HP is tray 2, however if you do not have that